Carpet Protection Film - Standard 60 Micron Grade Self-Adhesive Normal Wound - 3 Sizes

Our standard 60 micron carpet protection film is perfect for protecting stair carpets from dust, dirt, drinks and paint.

Much thicker than most other products being sold online, our standard carpet protection films are more durable and less likely to tear or puncture, giving you complete piece of mind.

With the adhesive on the inside, our rolls of stair carpet protection film are designed to be easy to apply. 

When Would You Recommend Using 60 micron Carpet Protection?

• When you have moderate to heavy traffic but without stilettos being worn (if so, please select our super heavy 100 micron micron rolls).
• Where you have normal, not deep pile 80/20 carpet.

If you do have thick pile carpets, or think that people may be wearing stilettos at a party, we would recommend our 100 micron carpet protection film.

Please note, this product is not to be used on any hard surfaces - please see our hard surface protection products instead. 

How Should I Apply My Stair Carpet Protection?

The easiest way to lay carpet protection on stairs is to start from the top and work your way down. Stick the end of the roll to your landing, leaving a few inches between the end of the roll and the top step. Start unrolling the carpet protection roll and smooth it against the vertical part of the top step. Make sure to get the carpet protection film into the edge between the vertical part of the stair; the easiest way to do this is to just push it into the edge with your fingertips. Then just unroll to cover the tread of the stair. Repeat, until your stairs are covered.

When you have reached the bottom of your staircase, use a craft knife or a pair of scissors to cut the roll.

If you have any enquiries regarding our range of carpet protection film products, please call our freephone support hotline on 01372 747 555 and speak with our experts or contact us online.